Passion for travel, making, engineering and all things design.
10 years working as a design engineer & 18 at Autodesk working on design software. Opinions and content are my own.
Over the last year, I have been banging parts on the Tormach 440
[https://www.tormach.com/product-pcnc-440.html]. I have proven I can get great
parts off the machine and have paid
Using the right click menu in Fusion 360 brings up a context menu. This menu is
divided into two sections. At the bottom is a classic context menu. At the top
is a
Sometimes you need to round model variables to a specific fraction.
For example cut stock may come in 1/8 or 1/4 or any other inch increment.
I recently had a case
I was happy but never quite satisfied with the stock 4in vise
[https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=35285-SET&portrelay=1]
.
I work with some smart folks
Timeline or Parametric Designs
Fusion 360 offers designers multiple ways to model. Think of this like there are
multiple ways to carve a statue. You can chisel and hammer it out of stone,